Flue Systems, Dampers & Terminals

 

Broag - Remeha offer a range of flue systems, terminals and flue dampers to assist with the installation of the boilers.

For the Quinta range a full range of Concentric and Excentric flue systems are available. For common flue header arrangements, please see a flue specialist and be sure the flue size is confirmed as appropriate for the installation proposed.

For the larger boilers i.e. Gas 210, 310 and 610 boilers, the flue terminals only are available from Broag - Remeha. For the interconnecting pipework between the boilers and the flue terminal please see a flue specialist.

For the flue for the P series pressure jet boilers, the Gas 360 and 460 atmospheric boilers and the water heaters please see a flue specialist.

 

Important advice for householders who have flues which run in ceiling spaces



If you live in a property that has a boiler flue which cannot be inspected because it is hidden behind a wall or ceiling, you need to install an inspection hatch. Gas engineers need to be able to see the flue # which take fumes away from the boiler # as part of essential safety checks. A flue in poor condition, combined with a boiler that is not working properly, could put you and your family in danger from carbon monoxide poisoning, which can cause death or serious injury.

If your boiler is situated on an outside wall, it is unlikely you have this type of flue. Alternatively, if your engineer can see all of the flue, you will not need to take any further action.

If you do have a boiler where all, or part of, the flue cannot be seen, you, or your landlord, will need to arrange for inspection hatches to be fitted. This does not mean, however, that your flue system is suddenly unsafe. As long as the boiler passes a series of safety checks # including having audible carbon monoxide alarms fitted # it can be used normally for the time being.

Carbon monoxide alarms are not an alternative to being able to see the flue and you will still need to have hatches fitted. It is recommended, that hatches are fitted as soon as you are able to do so. From 1 January 2013, any registered gas engineer will turn off the gas supply to the boiler until hatches have been fitted in appropriate places.

Please click here for more information on this subject.

If you have any questions or to find a Gas Safe registered engineer in your area please visit http://www.gassaferegister.co.uk/fluesinvoids. Or ring 0800 408 5500.